In order to place a picture in your post you would do the following...
1. Click on the paper clip at the top of the message block.
2. In the box that appears click on "Browse" to bring up your computer files.
3. Select a file from your computer and click "Upload".
Note: Files must be 39K or smaller. Edit your picture if necessary to make it small enough to post.
4. After your file is uploaded click the "X" to close the box.
5. Place your cursor where you want the picture to appear in your post.
6. Click on the paper clip again and then click on the picture link in the drop down menu.
7. You can add further type under the picture (Attachnemt) if you wish AND you can center the "Attachment" by highlighting the code then clicking on "align center" on the menu above the message block.
